|
|
Microtest Inc. Site Map
-
- Main Page:
Introduction and Welcome
- About Us:
Learn about Microtest, Inc.
- Microtest
Newsletter: Read past archives and sign up for our newsletter
- Products:
Information and examples of Microtest, Inc. products
- MT
101W: A production test fixture with 2 RF ports and 2
DC ports
- MT109:
This concept is for packages which go to very high frequencies
and need precise ground-contact definition
- MT71W:
The MT71W has 4 microwave ports which can handle frequency
well above the moding frequencies of the package.
- MT113:
This fixture is an example of a family of fixtures where testing
of packages on circuit boards is desired
- MT130:
These fixtures have about the same characteristics as MT193.
- MT0785W:
The MT0785W has been designed for long lead packages.
- MT0786
- MT131-1:
This is a fixture-insert for an automatic handler (89 packages
mostly).
- MT108:This
is an example for a coaxial test fixture with LRL Calibration
Standard
- MT140:
This multi-port test fixture is for testing can-like packages
to... 15GHz.
- MT143:
This fixture is an example for automatic port switching with
a repeatability of 0.03db.
- MT110:
The MT110 is a test fixture for TO-8 like packages.
- MT187:
The MT187 fixture features high contact-density and long life.
- MT0786a:
This fixture was designed to work with an ismeca handler.
- MT98
W: The uniqueness of the MT98 is the signal - and ground
contact designs.
- MT147:
This fixture is an example of a highly repeatable isolator
test fixture.
- MT96W:
The MT96W is a 3 RF-port and 2 DC-port package test fixture.
- MT79W:
The MT79W is a test fixture for packages with long leads.
- MT74A:
The MT74A is a fixture which tests packages in the same environment
they are used later in the final assembly.
- MT172:
Accurate and repeatable testing of microwave power-transistors
with vector network analyzers becomes increasingly desirable.
- MT176:
The MT 176 tests micro strip circuits with variable X-Y size
and has springy ( no solder ) transitions.
- MT680W:
The MT680W is a fixture which closes pneumatically.
- MT61A:
The model MT61A is a "burn in" fixture for circuits
as shown and similar. The advantage is dual function design
("burn-in" + "on board test") which ensures
proper contact with the board. It works over a large temperature
range and is easy to use.
- MT181:
This fixture is an example for a fixture which measures packages
with the BGA contact mechanism.
- MT193:
The MT193 has 26 low freq. (DC) ports and 6 RF ports.
- MT199:
The MT199 is for testing BGA - packages. It compensates for
unequal eights of the bumps. Thru - lines are available with
low VSWR.
- MT203-1:
The MT203-1 allows you tuning of the microwave ports.
- Services:
A description of the services Microtest, Inc. offers and capabilities
- Contact:
Address, Phone, Email and Online form to contact Microtest, Inc.
- Specification
Checklist: Online Free Quote request form.
|
|
|
